Interlogix NS3550-8T-2S User Manual - Manual (Page 326)

326
6.5 VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all',
(default: All ports)
Example:
Show VLAN status of port1
NS3550-8T-2S:/>vlan configuration 1
VLAN Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType LinkType Q-in-Q Mode Eth type
---- ---- ---------- ---------- -------- ----------- --------
1 1 Disabled All UnTag Disable N/A
VID VLAN Name Ports
---- -------------------------------- -----
1 default 1-10
VID VLAN Name Ports
---- -------------------------------- -----
VLAN forbidden table is empty
VLAV PVID
Description:
Set or show the port VLAN ID.
Syntax:
VLAN PVID [<port_list>] [<vid>|none]
Parameters:
<port_list> : Port list or 'all', default: All ports
<vid>|none : Port VLAN ID (1-4095) or 'none',
(default: Show port VLAN ID)
Default Setting:
1
Example:
Set PVID2 for port10
NS3550-8T-2S:/>vlan pvid 10 2
VLAN Frame Type
Description:
Set or show the port VLAN frame type.
Syntax:
VLAN FrameType [<port_list>] [all|tagged]
Parameters:
<port_list> : Port list or 'all', default: All ports