Interlogix NS3550-8T-2S User Manual - Manual (Page 320)

User’s Manual of NS3550-8T-2S
320
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable flow control
disable : Disable flow control
(default: Show flow control mode)
Default Setting:
Disable
Example:
Enable flow control function for port1
NS3550-8T-2S:/>port flow control 1 enable
Port State
Description:
Set or show the port administrative state.
Syntax:
Port State [<port_list>] [enable|disable]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable port
disable : Disable port
(default: Show administrative mode)
Default Setting:
Enable
Example:
Disable port1
NS3550-8T-2S:/>port state 1 disable
Port Maximum Frame
Description:
Set or show the port maximum frame size.
Syntax:
Port MaxFrame [<port_list>] [<max_frame>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<max_frame> : Port maximum frame size (1518-9600), default: Show maximum frame size
Default Setting:
9600
Example:
Set 2048 frame size for port1
NS3550-8T-2S:/>port maxframe 1 2048
Port Power
Description:
Set or show the port PHY power mode.
Syntax:
Port Power [<port_list>] [enable|disable|actiphy|dynamic]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable all power control