Interlogix NS3550-8T-2S User Manual - Manual (Page 451)

User’s Manual of NS3550-8T-2S
451
Add VCL protocol-based VLAN LLC protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Add Llc <dsap> <ssap> <group_id>
Parameters:
<dsap> : DSAP value (0x00-0xFF)
<ssap> : SSAP value (0x00-0xFF)
<group_id> : Protocol group ID
VCL Protocol-based VLAN Delete Ethernet II
Description:
Delete VCL protocol-based VLAN Ethernet-II protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Eth2 <ether_type>|arp|ip|ipx|at
Parameters:
<ether_type>|arp|ip|ipx|at : Ether Type (0x0600 - 0xFFFF)
VCL Protocol-based VLAN Delete SNAP
Description:
Delete VCL protocol-based VLAN SNAP protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Snap <oui>|rfc_1042|snap_8021h <pid>
Parameters:
<oui>|rfc_1042|snap_8021h : OUI value (Hexadecimal 00-00-00 to FF-FF-FF).
<pid> : PID value (0x0-0xFFFF). If OUI is 00-00-00, valid range of PID is from 0x0600-0xFFFF.
VCL Protocol-based VLAN Delete LLC
Description:
Delete VCL protocol-based VLAN LLC protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Llc <dsap> <ssap>
Parameters:
<dsap> : DSAP value (0x00-0xFF)
<ssap> : SSAP value (0x00-0xFF)
VCL Protocol-based VLAN Add
Description:
Add VCL protocol-based VLAN group to VLAN mapping.
Syntax:
VCL ProtoVlan Vlan Add [<port_list>] <group_id> <vid>
Parameters:
<port_list> : Port list or 'all', default: All ports
<group_id> : Protocol group ID
<vid> : VLAN ID (1-4095)
VCL Protocol-based VLAN Delete
Description:
Delete VCL protocol-based VLAN group to VLAN mapping.
Syntax:
VCL ProtoVlan Vlan Delete [<port_list>] <group_id>
Parameters:
<port_list> : Port list or 'all', default: All ports