Interlogix Monitor XL Advanced Installation Guide - Manual (Page 14)

8 Monitor xL™ Advanced Installation Guide 21-3602E rev1.5
S00202 Invalid Cards and PINs Detection Selections
Keypad Selections
(left to right on keypad screen) Example:
Default Name Selections Description
12 Reset
Timeout
NOTE: The card
feature is only
available with the
addition of the
Feature Expansion
Board.
1 – 31 (Delay Table), 12 = 2min
(0 is meaningless and is not used) The period of time required before there
are no further invalid PIN/cards and a
“Invalid PIN/Card Condition” resets.
12 Lockout Time
NOTE: This feature
is only available
with the addition of
the Feature
Expansion Board.
1 – 31 (Delay Table), 12 = 2min
(0 is meaningless and is not used) The length of time a user is locked out of
the system after X number of invalid
PIN/Card tries are made, even if a valid
try is made.
09 Maximum
number of
invalid cards
NOTE: This feature
is only available
with the addition of
the Feature
Expansion Board.
00 = 1 invalid card, 01 = 2, 02 = 3, etc to 63 = 64 The amount of invalid cards used before
an “Invalid card Condition” occurs.
5 Maximum
number of
invalid PINs 0 = 1 invalid PIN, 1 = 2, 2 = 3, 3 = 4, 5 = 6, 7 = 8 The amount of invalid PINs used before
an “Invalid PIN Condition” occurs.
(European = 02)
0 Invalid card
detection type
NOTE: This feature
is only available
with the addition of
the Feature
Expansion Board.
0 = invalid card detection is turned off, 1 = detect invalid
cards, 2 = 1 + “high risk denied” cards, 3 = 1 & 2 + lower
risk denied cards (all denied). Invalid Card Examples: wrong
version number, wrong site code,
card not in database. High Risk
Denied card examples: time expired,
interlock violation, reader locked out,
no area authority. Low Risk Denied
card examples: no area disarming
authority, wrong class, timeouts,
anti-passback violations.
3 Number of
different
users for
global lockout
NOTE: The Card
feature is only
available with the
addition of the
Feature Expansion
Board.
0 =4 different invalid users, 1 = 6, 2 = 8, 3 = 10. Defines how many different users have
to be individually in an invalid PIN or
unauthorized card lockout condition
before a global lockout will occur for all
users.
 (no) Transmit
global lockout
alarm
NOTE: This feature
is only available
with the addition of
the Feature
Expansion Board.

(yes)
□
(no)
 = invalid card and/or PIN causes local
warning only.
 = local warning & reports to the
monitoring station.
12 · 12 · 09 · 5 · 0 · 3 · 

Save S002

02