Interlogix Monitor XL Advanced Installation Guide - Manual (Page 8)

2 Monitor xL™ Advanced Installation Guide 21-3602E rev1.5
Advanced Program Sections, Sub Program Sections and Selections
NOTE: For quick reference to locate Advanced Programming Section Selections, consult the Index at the back of this
manual.
WARNING: Access, Elevator and Suite Security selections are only available with the addition of the
“Feature Expansion Board” to the System.
Programming selections whose boxes are grey are not available for this version.
System Global Timer Delay Codes
00: undefined;
01: 1 sec;
02: 2 sec;
03: 3 sec; 04: 5 sec;
05: 10 sec;
06: 15 sec;
07: 20 sec; 08: 30 sec;
09: 45 sec;
10: 60 sec;
11: 90 sec; 12: 2 min;
13: 3 min;
14: 5 min;
15: 10 min; 16: 15 min;
17: 20 min;
18: 30 min;
19: 45 min; 20: 60 min;
21: 90 min;
22: 2 hr;
23: 4 hr; 24: 6 hr;
25: 8 hr;
26: 10 hr;
27: 12 hr; 28: 16 hr;
29: 20 hr;
30: 1 day;
31: 1 week
Program Section: S001 (System Wide Selections)
S00100 Keypad Selections
(left to right on keypad screen) Example:
Default Name
Selections Description
14
(5 min) Burglary Siren Time Siren Time: See Timer Delay Codes Chart 00 =
disabled to 22 = 2 hrs max. How long a siren in the system will
sound.
(UK ACPO = 16: 15 min)
(European = 17: 20 min)
03 Number of panel
inputs Multiply entries by four (4)
E.g. 4 X 1 = 4. Enter “1” for 4 inputs.
4 X 2 = 8. Enter “2” for 8 inputs.
4 X 3 = 12. Enter “3” for 12 inputs.
4 X 4 = 16. Enter “4” for 16 inputs.
4 X 5 = 20. Enter “5” for 20 inputs. MONITOR Panel default = 2
For VBUS input boards connected to the
main controller VBUS port. 20 inputs
maximum. 12 on main board and 1
VBUS input boards possible.
01 Number of panel
outputs Multiply entries by four (4)
E.g. 4 X 1 = 4. Enter “1” for 4 outputs.
4 X 2 = 8. Enter “2” for 8 outputs.
4 X 3 = 12. Enter “3” for 12 outputs.
4 X 4 = 16. Enter “4” for 16 inputs.
4 X 5 = 20. Enter “5” for 20 inputs.
4 X 6 = 24. Enter “6” for 24 inputs.
4 X 7 = 28. Enter “7” for 28 inputs. MONITOR Panel default = 2
(UK ACPO = 3: 12 outputs)
For VBUS output boards or modem
output boards connected to the main
controller VBUS port. 26 outputs
maximum. Program for 28 outputs and
skip outputs 27 – 28. 2 relays on main
board and 2 VBUS output boards
possible or 1 VBUS output board and
one 8 output modem board. Also see
S001:06 -07.
0 Panel Type 0 = Monitor xL, 1 = MONITOR ISM, 2 = Future, 3
= Future.
1 Module Bus (SNAPP)
Baud Rate
0 = Auto Minimum (19K2), 1 = Auto Maximum
38K4 The communications speed between the
main panel and the expansion modules.
1 Suite Security
(Condo) Baud Rate
NOTE: This feature is only
available with the addition of
the Director Software and
Feature Expansion Board.
0 = Auto Minimum (19K2), 1 = Auto Maximum
(38K4) 2 = 9600 (Auto Minimum), 3 = future. The communications speed between the
main panel and the Suite Security
modules.
0 Fallback Users 0: No access; 1: All readable tokens; 2: All with
valid site code; 3: 10 fallback users Specific Cards granted access if door
controller is unable to access the panel
database.
(UK ACPO = 3)
14 · 03 · 01 · 0 · 1 · 1 · 0

Save S001

00