Interlogix Monitor XL Advanced Installation Guide - Manual (Page 56)

50 Monitor xL™ Advanced Installation Guide 21-3602E rev1.5
T08001 How the input will behave when it is active.
Keypad Selections (left to right on keypad screen)
Default Name
Selections Description
 (no) Transmit in OFF 
(yes) □ (no)
Reporting to the Monitoring Station
 (no) Transmit in STAY 
(yes) □ (no)
Reporting to the Monitoring Station
 (no) Transmit in ON 
(yes) □ (no)
Reporting to the Monitoring Station
(UK ACPO custom point # 2 = yes)
 (no) Sonalert in OFF 
(yes) □ (no)
Keypad sounder active.
(UK ACPO custom point # 2 = yes)
 (no) Sonalert in STAY 
(yes) □ (no)
Keypad sounder active.
 (no) Sonalert in ON 
(yes) □ (no)
Keypad sounder active.
 (no) Siren in OFF 
(yes) □ (no)
System siren active.
 (no) Siren in STAY 
(yes) □ (no)
System siren active.
 (no) Siren in ON 
(yes) □ (no)
System siren active.
Default UK ACPO Custom Input Settings (T08000 and T08101)
Custom
Input Pt.
Level Characteristic
Type
Class Bypass Chime Pre-Alarm
T080 0 40 6 □
(no)
□
(no)
□
(no)
T081 0 10 5 □
(no)
□
(no)
□
(no)
Custom
Input Pt.
Transmit
OFF
Transmit
STAY
Transmit
ON
Sonalert
OFF
Sonalert
STAY
Sonalert
ON
Siren
OFF
Siren
STAY
Siren
ON
T080 □
(no)
□
(no)
□
(no)
□
(no)
□
(no)
□
(no)
□
(no)
□
(no)
□
(no)
T081 □
(no)
□
(no)

(yes)

(yes)
□
(no)
□
(no)
□
(no)
□
(no)
□
(no)
Program Section: R001 (Doors)
WARNING: R001  00 – R001  14 Access Control related selections are only available with the addition of
the “Feature Expansion Board”.
R00100 Keypad Selections
(left to right on keypad screen) Example:
Default Name
Selections Description
00 Access Module
Number 00 = Door undefined
01-24=Access Pod Module # The door controller module associated
with this reader/door.
blank Door Name 12 alpha-numeric characters A suitable name/description for this
reader/door.
1 Module Door
Port Number 1 or 2 The 1st or 2 nd door on the door controller
module. This is indicated on the PCB.
Tip: This is 1 for odd-numbered doors,
and 2 for even-numbered doors.
Note: The second door on each door controller module is configured separately (typically R002, R004, etc.).
00 · Door Name 1

Save R001

00