Interlogix Monitor XL Advanced Installation Guide - Manual (Page 57)

21-3602E rev1.5 Monitor xL™ Advanced Installation Guide 51
R00101,04 Keypad Selections
(left to right on keypad screen) Example:
Default Name
Selections Description

(yes)
1 st Reader Defined 
(yes) □ (no)
01 Reader Area 2 Digits
01 – 16
00 – outside area This is the area being entered by this
reader.
000 Card Lockout
Schedule 00 = No scheduled lockout
01 – 250 Schedule A schedule to specify when card
access will be blocked.
0 Enable / Disable Card
Type
(Card Action)
00 = None, 01=Escort Req’d, 02 =non-
permanent users, 03 =all users. Escort e.g. guard to take visitors around
0 Enable / Disable
Reader Type
(Card
Action)
If enabling reader, see *1 Note below.
If disabling reader, see *2 Note below. Reader enrolls or deletes cards.

(yes) Arming Station

(yes) □ (no)
(UK ACPO = yes)
 (no) Lockout In Schedule 
(yes) □ (no)
 (no) Enable / Disable
Reader (Card Action)

(yes) □ (no)
See Notes 1 & 2 below.
 (no) Unlock on Enable /
Disable (Card Action)

(yes) □ (no)
The reader door will unlock when a
card is enabled or disabled at the
reader.
Note *1: If enabling reader, 0=enable for 4 hrs, 1=enable for 8hrs, 2=enable for 12 hrs, 3=enable for 24 hrs, 4=enable
for 1 week, 5=enable until midnight tonight, 6=enable permanently, 7=enable until out of window according to
schedule 50.
Note *2: If disabling reader, 0=disable card permanently, 1=disable card but set it so that it can be re-enabled later at
an enabling station, 2= disable card permanently and trigger auxiliary output , 3= disable card enable re-enroll
and trigger auxiliary output, 4 to 7 = not used, same as 1 (room for future expansion)

· 01 · 000 · 0 · 0 ·



Save R001

01