Zig-zag stitching, Stitch pattern selector, Needle position selector – SINGER 6217 User Manual
Page 22: Stitch width selector
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1 2 3
4 5
6 7
10
11
/WWV-AAA
4. ZIG-ZAG
STITCHING
Stitch pattern selector
Raise the needle to its highest position.
• Set the stitch width selector to the straight
position (
j
). (This allows the pattern
selector to be moved easily).
• Slide the pattern selector to the centre of
the desired pattern group.
Needle position selector
Before moving selector, make sure needle
is fully raised.
Most of your zig-zag stitching will be done
with the needle in the centre ( ' ) position.
• Left( ^ ) and right ( ^ ) settings are used
for special stitch placement.
stitch width selector
Before moving selector, make sure needle
is fully raised.
To produce any of the zig-zag stitches, the
stitch width selector is moved from its
straight position ( i ) to any of its other
four positions. The further you move the
selector level toward the right, the wider
your stitch will be.
20