Slant overedge stitch no. 7, Iiillml – SINGER 6217 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Slant overedge stitch
no. 7
Seams in knitted and stretch fabrics can be
joined and finished in one operation when
you use the slant overedge stitch.
• Baste the garment together on the seam
line allowing for a 5/8” seam allowance
and fit in the usual way.
Required settings
Stitch Selection;
Slant Overedge no. 7
Needle Position:
iEU
Stitch Width:
iiillMl
Stitch Length:
At dot (•)
Foot:
General Purpose (B)
Needle Plate:
General Purpose (A)
After making any adjustments, trim the
seam edge evenly to a 1 /4” from the seam
line basting.
Place trimmed seam under the foot so that
the straight stitches fall on the basted seam
line and the zig-zag stitches fall over the
seam edge.
31