Threading the machine, Winding the bobbin, Preparation – SINGER 714 Graduate User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
threading the machine
WINDING THE BOBBIN
it is best to wind the bobbin before you thread
1* Turn hand wheel toward you until needle is
at its highest position.
2, Disengage hand wheel from sewing mech
anism by loosening the hand wheel knob
with your right hand while holding the hand
wheel with the left.
3. Open the slide plate. Lift out the bobbin.
1. Place thread spool on spool pin over the
spool pin felt. Lead thread between tension
discs (as shown), around thread post and
through small hole In bobbin (from the in
2, Place bobbin on spindle.
This manual is related to the following products: