Accessories, 1, bobbins, Needles – SINGER 714 Graduate User Manual
Page 6: Tension screwdriver
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changiiig the Needle
The accessories that come with your sewing
machine are designed to help you do many
kinds of sewing easily and perfectly.
To increase the versatility of your machine still
iurther, additional accessories can be pur
chased at your Singer Sewing Center. For de
scriptions, see page 47.
• One 6rop-m steel bobbin in your machine.
• Extra drop-in steel bobbins with your acces
In place in your machine ~~
• Catalog 2020 (15x1)
With your accessories —
• Catalog 2020 (15x1) needles, for all-purpose
Catalog 2045 ball-point (yellow band)
needles, for sewing synthetic knits and
Changing the Needle
The needle clamp has been designed so that
the needle can only be inserted with the flat
side of the shank toward the back.
1. Raise needle bar to its highest position,
loosen needle-clamp screw, and remove
2. Insert new needle in clamp, with the flat
side of the needle to the back, and push
it up as far as it will go,
3. Tighten needle-clamp screw.
3. TENSION SCREWDRIVER
Designed to fit the bobbin case tension screw,
this screwdriver makes adjustment of bobbin-
thread tension quick and easy. (For instruc
tions on bobbin-thread tension adjustment, see