SINGER 714 Graduate - Manual (Page 24)

adjusting dials
SETTING PATTERN DIAL
Before moving the dial, make sure needle is
above the fabric.
Push the pattern dial in and turn it until de­
sired zig-zag stitch pattern is between the red
lines.
To produce a Flexi-Stitch pattern, the stitch
control dial must be turned until the symbol
STRETCH appears under the red line.
Miiiliiiili.
i < - i |
“ | K
1 > : l i l
1 ■ > i 1 - ai —1,
iminiM.
Push In
Rotate
Release
ADJUSTING STITCH PLACEMENT
Before moving needfe position dial, move
stitch width to 5, and make sure needle is
above the fabric.
Needle position setting A places the needle
in center stitching position. Settings L and R
place the needle in left and right stitching
positions at stitch widths less than 5,
Setting A is used most often. Settings L and
R are for special placement of stitching. For
example, an L setting is required for button-
holing and button sewing. An L or R setting
can be used to place narrow zig-zag stitching
to the left or right of center in decorative work.
To adust stitch placement, turn needle posi­
tion dial until desired setting is aligned with
the red line.
nunninF^
Adjusting Stitch Placement
.... .......^.....
Left Needle Position Center Needle Position Right Needle Position
22