Treadle drive, Dual purpose electric/treadle drtve, Electric drive – SINGER 514 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TREADLE

DRIVE

# Loosen hand wheel knob.

# Place feet on tfeadle.
# Turn hand w4ieel over toward you and

allow feet to move freely and lightly

with motion of treadle.

# Practice this motion until you are able

to redstart machine v/ith hand wheel
turning over toward you<

# Tighten hand wheel knob.

# For light, insert machine plug and

connect wall plug. Switch on light,

# Place material under presser foot and

lower the presser foot.

# Operate machine (without thread} until

you become accustomed to guiding
the material

# To disengage belt—operate treadle

and throw-off belt to the right.

# To engage belt—operate treadle with

hand wheel turning toward you and
guide belt on to band wheel

NOTE; Belt tension should be only

heavy enough to keep belt

from slipping.

DUAL PURPOSE

ELECTRIC/TREADLE DRtVE

Electric Drive

CAUTION: Before insermg machinem

plug and wall plug (he beh for treacHe |

drive must be disengaged as instructed |
above,

11

# Operate the machine as instructed for

electric drive on page 10.

Treadle Drive

# Disconnect rnachine/controller plug

from machine and wall plug from

electrical outlet as shown. (If light

connection is required a special light

lead must be used—please consult

your SINGER Sewing Centre.)

# Operate machine as instructed above.

DISENGAGING HAND WHEEL

ENGAGING BELT DRIVE

Advertising