Setting pattern selector, For rlc-rac stitch, For slant overe^e stitch – SINGER 514 User Manual
Page 27: For faggoting stitch, Setting stitch width and needle position, Sewing, Flexi-stitch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Flexi-Stitch
sewing
Pattern Selector: See below
f/exhSHtch Dial: Red bar |
Stitch Width:
I
I
. J
Needle Position:
1 ^
Stitch Length: Red bar ms»
Pfossyre: See page 21
Tension: See page 26
General Purpose Prosser Foot
General Purpose Needle Plate
Speed: Moderate
With your sewing machine you can pro
duce three kmcis of Ffoxi-Stitch: nc-rac
stitch, slant overodge stitch and faggot
ing stitch.
Always use moderate speed when sewing
a Rexi-Stitch pattern.
SETTING PATTERN SELECTOR
Set the stitch width dial on ; before
turning the pattern selector.
For Rlc-Rac Stitch
# Turn selectof to
For Slant Overe^e Stitch
# Turn selector to .
For Faggoting Stitch
Щ Turn selector to
SETTING STITCH WIDTH
AND NEEDLE POSITION
Always raise the needle above the
needle plate and fabric before changing
the stitch width.
Turn the stitch width dial from its
straight stitch position i , to any sotting
between ^ and § .
Most of your f'i^i-Stitch sewing will be
done at centre needle position: left and
right settings are used for special stitdv
ing.
For straight stretch stitch, turn the stitch
V‘/idth dial back to i ,
DIAL SETTINGS
mxi-Sthch
Dial
■ '
' Л
SlarTt Overadge Stitch
ii
's,
■ N2
Faggoting Stitch
Pattern Selector
Stitch Width Dial
Nccdlle Position Dial
25