The bobbin thread winding the bobbin, Your sewini – SINGER 514 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
your sewini
THE BOBBIN THREAD
Winding the Bobbin
Always wind the bobbin before threading
the needle,
1. Raise the presser foot.
2. Turn hand wheel toward you imtil
needle is above the presser foot.
3. Disengage hand wheel by pressing
bobbin symbol (@) on hand wheel
disc.
(For treadle drive, loosen the hand
w4ieef knob.)
REMOVIIMG BOBBIM
4. Open slide plate with finger pressure
as Illustrated.
6, Lift out bobbin,
6. Fully close slide plate to make sure
that needle plate is secure.
13
Advertising