SINGER 514 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Method 2
This method is suitable for finer fabrics
which are inclined to curl or fray.
Set stitch width and stitch length to suit
fabric and place the seam allow/ance
under the presser foot with the edge of
the seam in line with the side of the
presser foot as illustrated. Trim the fabric
to the stitch line.
Method 3
This method can be used on most types
of fabric and gives a very flat finish to
seam edges.
The stitching comes to the edge of the
seam allowance, as illustrated-
37
Advertising