Setting stitch length and needle^thread tension, Stitch length, Needle-thread tension – SINGER 514 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING STITCH LENGTH AND
NEEDLE^THREAD TENSION
Make a test sample with the fabric and
thread you plan to use so that you can
adjust your stitch length and ncedlO'^
thread tension properly, if you need to
adjust pressure, see page 21.
Stitch Length
Any stitch length setting from 4 to 1 will
give you an open zig-zag stitch of
whatever pattern you select. The higher
the number, the more open, or farther
apart your stitches will be.
The area between 1 and 0 is used for the
adjustment of closed zig-zag. or satin
stitching, and is explained on page 24.
STITCH muQTH
stitch Length Dial
Ывтш-ГНПВАО ГЕЫВ10Ы
Needle-Thread Tension
Zig-zag stitching requires less tension
than straight stitching. Notice the stitch
ing on your test sample. The stitches
should lie fiat against the fabric without
being too taut or without causing the
fabric to pucker.
If the stitches are not flat lower the
needle-thread tension by turning the dial
to a lower number.
Too Tight
Correct
23