Leathmook vinyl t – SINGER 514 User Manual

Page 54

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

LEATHER-LOOK VINYL

Stitch diagonally across the point

LEATHmOOK VINYL

t

# Use masking tape or zipper adhesive

tape instead of pins or basting to bold

seams, zippers and hems in place for
stitching.

# Stitch with a long stitch (2.5 - 3.5).

A short stitch may cut the fabric.

# Sew with a steady, even pace and

stitch accurately. Seams cannot be
ripped out without leaving needle
marks in the fabric.

0 The shiny side of some vinyls tends to

stick to metal surfaces. Use a strip of

tissue paper between the fabric and
metal machine surfaces to prevent

this. Other remedies include dusting
fabric with talcum powder or v^iping
surface with a damp sponge.

# Reinforce button and buttonhole areas

with interfacing. Bound buttonholes

are the best choice for vinyls with
knit backing.

# Top stitching holds seams and garment

edges smooth and flat and adds a

decorative note.

# For sharp points on collars and lapels,

take one or two stitches diagonally

úcross the point to allow enough
space to smoothly enclose the seam
edge,

fThe Even Feed Foot, available for separate

purchase. Is designed to aid In sewing this

fabric.

52

Advertising