To wind the bobbin – SINGER 15-90 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
Raise the take-up lever 5, Fig. 6 to its highest point.
Withdraw the bed slide plate. Reach down with
the left hand and open the bobbin case latch M and
lift out the bobbin case. Release the latch and re
move the bobbin from the bobbin case.
TO REMOVE THE BOBBIN
F
ig
. 7. R
emoving
the
B
obbin
C
ase
TO WIND THE BOBBIN
(S
ee
F
ig
. 8
on
the
F
ollowing
P
age
)
Hold the balance wheel D with the left hand and,
with the right hand, loosen the stop motion screw E
to release the balance wheel from the stitching
mechanism.
Place the bobbin on the bobbin winder spindle as
far as it will go, having the small pin enter the
hole in the side of the bobbin.