SINGER 15-90 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Pipe with the
Edge-Stitcher
(1) Cut the piping bias and
twice the width of the
slot 3 so that it can be
folded once.
(2) Insert the piping with its
folded edge to the left
in slot 3 and the edge
to be piped in slot 4,
Fig. 51.
To Apply Folded Bias Tape or Military Braid
(1) Place the garment under the edge-stitcher and the
tape in slot 1 or 4, Fig. 51.
52
F
ig
. 54
P
iping
with
E
dge
-S
titcher
F
ig
. 55. A
pplying
B
ias
F
olded
T
ape
(2) To make square corners, sew to the turning point,
remove the tape from the attachment, form the
corner by hand, replace the tape and continue
stitching.
(3) To space two or more parallel rows, mark the
material with a guide line, using a crease, chalk
or basting thread.