The edge-stitcher, To adjust the, To sew lace together – SINGER 15-90 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
50
THE EDGE-STITCHER
This attachment should be used when the stitch
ing must be kept accurately on the extreme edge of
the material. It is also useful for sewing together
laces, insertions and embroideries, sewing in position
hemmed or folded edges, piping or sewing flat braid
to a garment.
To Adjust the
Edge-Stitcher
Fasten this attachment to
the presser bar in place of
the presser foot.
See that the needle enters
the center of the'needle hole.
i
The distance from the line
of stitching to the edge of
the material in the slots is
regulated by moving the lug
D2, Fig. 51 to the right or
left.
F
ig
.
51
T
he
E
dge
-S
titcher
To Sew Lace Together:
(1) Insert one of the laces in slot 1 of the edge stitcher
and the other in slot 4, Fig. 51.
(2) Adjust the lug D2 until the edges to be joined
are caught by the stitching.
(3) Slightly overlap the edges of the lace while stitch
ing to keep them against the ends of the slots.
^4) Loosen both thread tensions to avoid puckering
of fine lace.