To remove the shuttle – SINGER 15-90 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Occasionally remove the shuttle from the machine,
as instructed below and remove any lint, etc., which
has accumulated in the machine.
TO REMOVE THE SHUTTLE
Draw to the left the bed slide plate. Turn the
balance wheel over toward you until the needle is
29
F
ig
.
30.
S
howing
P
osition
of
S
huttle
for
R
emoval
from
M
achine
at its highest point and the point of the shuttle is
at the position shown in Fig. 30.
Remove the bobbin case and bobbin. Take out
the thumb screw D, Fig. 30, also the spring
C, Fig. 30 and the shuttle race back B, Figs. 30
and 31. The shuttle A, Figs. 30 and 31 may now
be easily removed and the parts cleaned.