SINGER 15-90 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Adjust the Ruffler for Plaiting:
(1) Raise the adjusting lever E and move it until the
projection D can be entered in the slot marked
“6.” The ruffler will then plait once every six
stitches. To plait once every 12 stitches, have
the projection D enter the slot “12’* in the
adjusting lever E.
61
F
ig
. 69. P
laiting
with
the
R
uffler
(2) Insert the material to be plaited between the two
blue blades Line 2, Fig. 70.
MATERIAL
F
ig
. 70. C
orrect
P
osition
for
the
M
aterial
(3) To increase the width of plait, move the adjust
ing finger F back toward the needle and turn
the adjusting screw C downward. To make a
smaller plait, turn the adjusting screw C up
ward. The distance between plaits is regulated
by the length of stitch.