SINGER 15-90 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ADJUSTABLE HEMMER
To Make Hems Wider than 15/16 Inch
(1) Loosen the thumb screw on the hemmer, move the
scale to the right as far as it will go, then swing
it toward you, as shown in Fig. 43, and tighten
the thumb screw.
(2) Fold and crease the desired width of hem.
42
F
ig
. 43. S
howing
H
ow
A
djustable
H
emmer
is
U
sed
FOR
M
aking
H
ems
W
ider
than
15/16 I
nch
(3) Place the fold under the extension at the right
of the hemmer and the edge into the folder, as
shown in Fig. 43.
(4) Draw the end of the hem back under the needle,
lower the presser bar and commence to sew.
(5) Guide the cloth to keep the hem flat.
Advertising