SINGER 15-90 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When you have finished the darning or embroidery,
raise the presser bar lifter and replace the presser
foot. Turn the machine back on its hinges and move
the thumb screw B, Fig. 32 down to the bottom
of the slot of the feed lifting crank A, Fig. 32 and
make sure that the thumb screw is firmly tightened.
Bring the machine forward into place, return the
stitch regulating lever X, Fig. 17 to its original posi
tion and the machine is ready for regular stitching.
Stockings and socks, underwear, etc., can be
more conveniently darned on the machine with the
SINGER Darner which can be purchased at any
SINGER Shop or from any SINGER Salesman.
34
SINGER
Needles should be used
in
SINGER
Machines
These Needles and their Containers
are marked with the
Company’s Trade Mark “SIMANCO.*” i
Needles in Containers marked
“FOR SINGER MACHINES”
are NOT
SINGER
made needles.
2