Principal parts of the rüffler – SINGER 15-90 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRINCIPAL PARTS OF THE RÜFFLER
56
F
ig
. 6
ü
. P
rincipal
P
arts
of
the
R
üffler
A—Foot—attaches ruffler to the presser bar.
B—Fork Arm—straddles the needle clamp.
C—Adjusting Screw
—regulates fullness of the gathers.
D—Projection—engages the slots in adjusting lever.
E—Adjusting Lever—sets the ruffler for gathering or
for making a plait once at every six stitches or once
every twelve stitches as desired; also for disengag
ing the ruffler, when either plaiting or gathering
is not desired.
F—Adjusting Finger—regulates the width or size
of the plaits.
G—Separator Guide—contains slots into which
the edge of the material is placed to keep the
heading of the ruffle even; also for separating
the material to be ruffled f r o m the material to
which the ruffle is to be attached.
H—Ruffling Blade—pushes the material in plaits
up to the needle.
J—Separator Blade—prevents the teeth of the
ruffling blade coming into concact with the
feed of the machine or the material to which
ruffle or plaiting is to be applied.