SINGER 15-90 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PIPING AND BINDING IN
ONE OPERATION
A garment can be piped and bound in one opera^
tion, as shown in Fig. 48.
47
F
ig
. 48. P
iping
and
B
inding
in
O
ne
O
peration
IMPORTANT : When piping and binding at the
same time, as shown above, insert the narrow width
of binding first in its slot, then insert the wider
width in its slot. Two consecutive widths should
not be used at the same time. That is, if No. 1
is used, the wider binding should not be smaller than
No. 3 . If No. 2 is used, the wider binding should
be not less than No. 4. Never use Nos. 1 and 2,
or 2 and 3, etc., together.
Use the upright guide pins to guide the wider of
the two widths of binding, as shown in Fig. 48.