To operate the hand machine – SINGER 15-90 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6
TO OPERATE THE HAND MACHINE
(S
ee
F
ig
. 4)
Place the lever H
of the hand driving
attachment in the
socket G and turn
the hinged finger F
back between the
spokes of the balance
wheel, as shown.
F
ig
.
4.
E
nd
V
iew
of
M
achine
15-89
S
howing
H
and
D
riving
A
ttachment
Raise the presser foot B, Fig. 3 by means of the
presser bar lifter C, Fig. 3 to prevent injury to the
foot B and feed A, Fig. 3.
Turn the lever H of the hand driving attachment
over from you, continuing the motion thus begun
until a regular and easy movement is acquired. Then
tighten the stop motion screw E, Fig. 3 to connect
the balance wheel with the stitching mechanism.
Place a piece of cloth under the presser foot
B, Fig. 3, lower the foot by means of the presser bar
lifter C, Fig. 3 and operate the machine, without
thread, until you have become accustomed to guid
ing the material with the left hand.
NOTE: To release the lever H from the socket G,
withdraw the plunger J and pull out the lever.