SINGER 15-90 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Hold the bobbin case by the latch and place it
on the stud T of the shuttle body with the position
finger S opposite the notch at the top of the shuttle
race.
14
TO REPLACE THE BOBBIN CASE
£ 1 9 0 9 6
F
ig
.
13.
B
obbin
C
ase
T
hreaded
and
R
eplaced
Release the latch and press the bobbin case back
until the latch enters the groove in the stud. Allow
about three inches of thread to hang free from the
bobbin case and close the bed slide plate.
Advertising