SINGER 15-90 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTABLE HEMMER
To Make Hems from 3/16 to 15/16 Inch Wide
(1) Attach the adjustable hemmer to the presser bar
in place of the presser foot.
(2) Pull up the bobbin thread, as instructed on page 15.
41
F
ig
.
42.
S
howing
H
ow
A
djustable
H
emmer
is
U
sed
FOR M
aking
H
ems
up
to
15/16
I
nch
W
ide
(3)
Loosen the thumb screw on the hemmer and move
the scale until the pointer registers with the
number of the desired width of hem, No. 1 indi
cating the narrowest hem and No. 8, the widest,
then tighten the thumb screw.
(4) Place the cloth in the hemmer and draw it back
and forth until the hem is formed, as shown
in Fig. 42.
(5)
Draw the end of the hem back under the needle,
lower the presser bar and commence to sew.
(6)
Guide sufficient cloth into the hemmer to turn the
hem properly.