Turning square corners – SINGER 413 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

As you stitch, use one of the numbered
lines on the throat plate as a guide for
keeping the seams straight. Numbers
indicate distance, in eighths of an inch,
from the needle. If you want a f-inch
seam, for example, keep the right-hand
edge of your fabric on the number 5
guideline.
KEEPING THE SEAM STRAIGHT
TURNING SQUARE CORNERS
To turn a square corner f-inch from
the fabric edge, you need not measure
or mark the seam. Simply use the
crosslines on the slide plate.
•
Line up your fabric with right or
left guideline 5 on the throat plate.
Stitch seam, slowing speed as you
approach corner.
• Stop stitching, with the needle down,
when the bottom edge of the fabric
reaches the cornering crosslines on
the slide plate.
•
Raise presser foot and turn fabric
on needle, bringing bottom edge of
fabric in line with guideline 5.
•
• Lower the presser foot and stitch In
new direction.
3/8"
1
/
2
"
3/4"
5/8
Pivoting at Corner
21