And what they do, Singer sewing machine – SINGER 413 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SINGER SEWING MACHINE
and what they do
1.
Bobbin Winder Tension Disc regulates thread tension for bobbin winding.
2.
Pressure Dial regulates presser-foot pressure on fabric. Has eight numbered
settings and a special setting for darning.
3.
Take-up Lever controls flow of needle thread.
4.
Presser-Foot Lifter, at back of machine, allows you to raise and lower presser
foot. Extra-high lift position permits easy placement of bulky fabrics.
5.
Thread Cutter is built into presser bar for safety and convenience.
6.
Needle Clamp holds single or twin needles and is designed to eliminate the
possibility of inserting needle backwards.
7.
Presser Foot holds fabric against feed. The feet snap off for quick removal.
8.
Throat Plate lifts out for easy removal. Guidelines on right and left sides extend
to slide plate to help you keep seams straight.
9.
Feed moves fabric under the presser foot.
10.
Spool Pin holds thread spool. Felt helps thread unwind smoothly.
11.
Bobbin Winder Switch and Bobbin Holder let you fill the bobbin with thread
quickly and easily.
12.
Hand Wheel positions take-up lever and needle. Always turn it toward you.
13.
F/exi-Stitch Pattern Dial sets the machine for F/exi-Stitch pattern sewing and
varies the balance of F/exi-Stitch patterns in order to correct pattern appearance.
Diai must be in off position O when not in use.
14.
Sewing Light illuminates the sewing area.
15.
Needle-Thread Tension Dial lets you select just the right tension for your
stitch, thread and fabric.
16.
Slide Plate opens for easy removal and replacement of the bobbin and raises
and lowers the pin that holds the throat plate in place.