Awwa iih ijjl, Zig-zag stitching – SINGER 413 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The zig-zag stitches built into your sewing machine include basic zig-zag
patterns and Flexi-Stitch patterns. Basic zig-zag patterns and their selector
settings are shown below; Information on Flexi-Stitch patterns starts on
page 27. You will find instructions for both decorative and practical uses
of these patterns in the section called "Sewing the Professional Way"
beginning on page 36.
ZIG-ZAG STITCHING
m
BASIC ZIG-ZAG PATTERNS
Plain Zig-Zag Stitch. Used for buttonholes, button sewing, bar
tacks and applique.
A A Blindstitch. Indispensable for finishing hems and seam edges and
for zipper insertion.
TO SEW A ZIG-ZAG STITCH
PATTERN USE BLACK SELECTOR
SETTINGS
• Turn Ftexi-Stitch pattern dial to black
off setting 0.
• Set pattern selector for stitch desired.
• Adjust stitch length, stitch placement,
stitch width and needle-thread tension
as instructed on the following pages.
SETTING PATTERN SELECTOR
Flexi-Stitch Pattern Dial Off
/vwv
AWWA IIH Ijjl
A... A...
Set the stitch width on O before moving
pattern selector dial.
For Zig-Zag Stitching
The pattern selector, located above the
stitch width selector on the front of the
machine, controls stitch selection.
For Plain Zig-Zag Stitching
• Move selector dial toward
For Blindstitching
• Move selector dial toward
/w\
urn
¿/¿/
A...A
For Blindstitching
Pattern Selector
23