Adjusting pressure and choosing accessories – SINGER 413 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Any stitch length setting from 6 to 20 will
give you an open zig-zag stitch of the
basic zig-zag stitch pattern you select.
The lower the number, the more open, or
farther apart, your stitches will be. The
FINE stitch area, between 0 and 20 on
the dial, is used for adjusting zig-zag
satin stitching (see next page for specific
instructions).
When using the plain zig-zag or blind-
stitch patterns, be sure the Flexi-St/tch
pattern dial is in off position 0.
ADJUSTING STITCH LENGTH
STITCH CONTROL
ADJUSTING PRESSURE AND CHOOSING
ACCESSORIES
Turn to page 18 under straight stitching for instructions on adjusting
pressure.
For information on choosing accessories, refer to pages 6 and 7 and to
detailed instructions for sewing with zig-zag stitch patterns included in the
section called "Sewing the Professional Way" that starts on page 36.
General Purpose
Foot
General Purpose
Throat Plate
Special Purpose
Foot
Zipper Foot
25