Guiding and supporting the fabric, Reinforcing end of seam – SINGER 413 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STRAIGHT STITCHING (Continued)
GUIDING AND SUPPORTING
Most fabrics need only to be guided in
front of the presser foot. Some fabrics,
however, require support while being
stitched. Filmy sheers, pann6 velvet, and
tricots, for example, need to be held taut
in front and back of the presser foot while
For information on sewing knit and
stretch fabrics with zig-zag stitching,
refer to page 37.
REINFORCING END OF SEAM
1. Stitch to the fabric edge.
2. Push in stitch control dial and back
stitch i inch to reinforce the end of
3. Raise presser foot and remove fabric
by drawing it to the back and left.
4. Cut threads on thread cutter at rear
of presser bar.
Ending a Seam