Use touch-screen to establish needle entry points – SINGER XL1000 Quantum User Manual
Page 105
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. Position embroidery frame and secure material in frame.
* Pattern shown in
full tone will be
first fathern to be sewn.
11 has lation of how to
secure material in
first hoopirg position.
NOTE:
TAKE CARE TO
INSTALL WITH LINES
INSIDE FRAME TRIANGLE
MARKS (SEE PAGE 94).
Turn handwheel to ascer
tain that needle rests
above horizontal marker
line (X-axis)
7. Use touch-screen to establish needle entry points
f,2,3 Determine
^ first point on
X-axis line.
Turn handwheel to ascer
tain that needle rests
above horizontal marker
4,5,6
Determine
^ second point on
X-axis line.
Specify 1st. point of
i
!
line (X-axis).
Specify 2nd. point of
X-axis line.
X-l—
X-axis line.
X-;
7
8
Q
Determine
^ first point on
Y-axis line.
Turn handwheel to ascer
tain that needle rests
above vertical marker
line (Y-axis).
second point on
Y-axis line.
Specify 2nd. point of
iPINOCi
000
MEMO
r
P
0
SIII
0
H-\
IK
104