SINGER XL1000 Quantum User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Example: To embroider
Attaching and removing embroidery frame Embroidering procedure
IJ
Fully raise embroidery
foot and place
embroidery frame
under it.
Locate embroidery
frame directly over
embroidery frame
holder aligning notch
® and ® with holder.
Push straight down
until it clicks.
To remove embroidery
frame from embroidery
frame holder lift
embroidery frame
while pressing
embroidery frame
holder lever to left.
fi
o
i
y
REV
STEP
Select a pattern to
be sewn. ________
(ROSE from
Order of sewing (color
steps) is shown at top
of touch-screen.
Suggested colors for
the rose are shown
on the front cover of
the instruction book.
Press [
enter
I key.
Thread machine head
with first color thread.
Pass thread through
hole in embroidery
foot, and lightly hold
slightly slackened
thread with left hand.
# %
021miol| 02 liT,„>
FniT REV
EE'iT STEP
A*'T -~—
0 8 X 1 0 H .
cm cm ^
1
COMBI
;
d
Note embroidery
information shown on
to touch-screeen.
Time remainirg
current sewing
step
size of
pattern
Time remainirg
for entire
pattern
frame
installed
Note:
Time will only show
when sewing at 750 spm.
76