How to establish needle entry point e, How to establish needle entry point f, 0h10 – SINGER XL1000 Quantum User Manual
Page 98
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
15
Using touch-screen to establish needle entry points e, f, g and h
)
How to establish
needle entry point e
^ Press touch-screen in
upper left portion and
a marker dot will appear.
Memorise 2 points on each
X and Y axis lines by
positioning frame and axis
lines under needle.
Touch to move to X~Y axis
input screen.
■■Y
r
rests above horizontal
{
"'1
marker line.
.
\
\
I L
\
\ \
Specify
1st.
point
of
^
X-axis line.
-1
Specify
1st.
point
of
1
X-axis line, X-^-—
------ r V-Ol I IWIN
QS0
0®0
0SS
Embroidery frame
will automatically
shift placing needle
above horizontal line.
OTurn handwheel to
^ ascertain that needle
[ Press needle position key
to adjust so that needle
is directly above line.
After adjusting with needle
position keys, turn handwheel
to check needle position.
^ Once needle entry point
' is properly established
on X-axis line, press
first- point position
memory key.
------- rUOIIlUIN------ -
SSQ
000
97
2. How to establish
needle entry point f
)
Press touch-screen in
upper right portion and
a marker dot will appear.
1
Specify
2nd.
point
of
1
X-axis line. X-4—H
f
_ \
1 ^
1
Y
—-POSITION-—
,000
'BBS
,000
MEMO
1 Y-LINE 1 1 II 2 1
Embroidery frame
will automatically
shift placing needle
above horizontal line.
OTurn handwheel to
^ ascertain that needle
rests above horizontal
marker line.
3
Press needle position key
to adjust so that needle
is directly above line.
After adjusting with needle
position keys, turn handwheel
to check needle position.
f
Once needle entry point
' is properly established
on X-axis line, press
second- point position
memory key.
Specify 2nd. point of
1
5
X-axis line.
X-*—
Specify 2nd. point of
X-axis line.
J i
^
ruomuiN
000
0H10
000