How to replace light bulb, Cleaning, Caution – SINGER XL1000 Quantum User Manual
Page 114: How to replace light bulb cleaning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^CAUTION:
Be sure to disconnect plug from wall outlet before opening cover.
How To Replace Light Bulb
side of face plate cover about two turns, and pull cover straight lamp installing base,
off.
twisting. Insert new
lamp along narrow groove.
Cleaning
Removing lint and dust
Accumulation of lint or dust may cause
problems. Always keep sewing machine
clean.
^ CAUTION:
Be sure to disconnect plug from wall outlet pAimnw-
before cleaning machine.
^ ^
■ x
Contact dealer for correct
light bulb replacement.
Remove needle and presser foot, and clean Power consumption of bulb
area between feed dog teeth and slots in is 5 watts,
needle plate, using brush furnished with
machine.
Always keep area around hook and bobbin
case clean.
How to Replace Needle Threader Hook Holder (Optional
Part) part N0.233075
I CAUTION:
Be sure to disconnect plug from wall outlet before removing needle.
Place exclusive screw- Align slit in new hook Push new hook holder up
Remove needle and driver on top of hook holder with needle from bottom with finger
1
presser foot.
2
holder and push down.
O
threader shaft pin.
4
until it snaps in place.
down.