Treading machine – SINGER XL1000 Quantum User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
‘V-/’
4
Follow threading
path arrows on
Q machine. (4,5,6,7)
3
Use both hands
to pull thread
Q into groove of
thread sensor
guide.
Treading Machine
To thread machine follow steps / through
10-
8
Guide
thread
behind O
and into ©
from left.
15
Raise presser foot
lifter.
Jm
Automatic Needle Threading
A.
Lower presser foot lifter.
B.
Push threading lever down.
Push threading lever all the
way down and a hook will go
C.
through eye of needle.
Threading lever
Raise needle to highest position. Place thread onto O-
Pass thread in front of needle and
below hook.
Advertising