Rolled hemming, Even feeding, Rolled hemming even feeding – SINGER XL1000 Quantum User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rolled Hemming
Material edge is hemmed while rolling
it under.
Used for finishing bottom of shirts
and blouses and edges of frills and
handkerchiefs.
Select straight stitch.
¿L
Change foot.
Attach rolled hemming foot supplied
in accessory bag.
Cut away a corner of material in order to make
work easier.
Insert material into spiral groove in hemmer foot
until needle position is reached.
Drawing ends of needle and bobbin threads, turn
handwheel 3 or 4 turns by hand to guide material
to hemmer foot.
Even Feeding
To prevent slippage of material, use even
feed foot.
* For matching plaids and designs.
*To prevent slipping, stretching or
sticking when sewing fabrics such as
synthetic suede, sheers, heavy knit
and quilted.
1
Select straight
stitch.
^ Remove presser foot holder.
Use even feed foot only for forward stitching.
* Do not use it for any patterns which feed sideways or
feed both forward and reverse.
Left needle position
CO
Attach even feed foot to machine.
Lift presser bar, remove presser foot clamp screw
and remove presser foot holder.
59
Put forked section of actuating lever around
needle clamp, attach to presser bar and securely
tighten presser foot clamp screw.
* Sew at low or medium sewing speed.
* To sew elastic materials such as knits and jersey, set presser foot adjusting lever to “LOW”. .