SINGER XL1000 Quantum - Manual (Page 67)

Optional Accessories
PintuCk foot
(part No.386022)
Uses:
• Sews evenly spaced plain twin needle pintucks.
• Sews evenly spaced corded twin needle pintucks.
Procedures:
Plain pintucks
1) Insert twin needle and thread machine with two
spools of thread, using auxiliary spool pin.
(See page 57)
2) Select center needle position straight stitch
(page 23)
3) Mark straight line for first pintuck.
4) Stitch along marked line. Increase tension as
desired, to make pintucks stand up.
5) Place first tuck Into desired groove on bottom of
pintuck foot. Stitch, allowing groove to guide fabric
for evenly spaced tucks.
Corded pintucks:
Follow procedure above, but place cording under
fabric. Lower twin needle by hand to ensure cording
is centered inbetween stitch, being sure to catch
cording between needles.
Open toe embroidery foot
(Part no .386023)
Uses:
• For satin stitching.
• For applique.
• For machine embroidery, cutwork and fagoting.
Procedures:
• This foot allows a clear view for sewing above
techniques.
• Follow Instructions found in Singer Sewing Reference
Library Series.
Darning/embroidery foot
(Part no . 3860 i 7 )
Uses:
• For free-motion embroidery, darning & monogramming.
Procedures:
1) Drop feed dog.
2) Place fabric into embroidery hoop (optional).
3) Attach foot and tighten presser foot screw with
exclusive screwdriver. Begin stitching, moving hoop
as you stitch. If not using hoop, grasp fabric firmly
with two hands and hold taut.
Sew at slow to medium even sewing speed.
Quilter’S foot
(PartNo.386005)
Uses:
• To sew perfect 1/4” seams for piecing quilt blocks.
• To sew narrow seams, such as those in doll clothes.
Procedures:
• Use in place of A foot.
• Select straight stitch pattern full left (automatic)
position.
Side cutter
(Part No.386001)
Uses:
• To cut and overedge fabric in one
step.
Procedures:
• Remove presser foot holder and
attach side cutter. Follow instructions
which come with side cutter.
• Tighten presser foot screw with
exclusive screwdriver.
66