Sew all patterns in second hooping position, 10,1w – SINGER XL1000 Quantum User Manual
Page 107
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7,3,9
Determine
^ first point on
Y-axis line.
Turn handwheel to ascer
tain that needle rests
above vertical marker
line (Y-axis).
10,1W
Determine
Turn handwheel to ascer-
second point on tain that needle rests
Y-axis line.
above vertical marker
line (Y-axis).
11. Sew all patterns in
second hooping position.
“*l
j
y
r-0-nr-O-l
€
€
M ! 0
003 min 003 min
(—X*Y—
02X22
cm cm
l
1
1_|----------------------- X
Start sewing.
NEXT If REV uci r
PflttERNj MEM
■
m
|+
i
a,|[ p
NOTE:As with first hooping machine will
determine which pattern to sew first.
Pattern to be sewn will show in full
tone.
NOTErSteps and color changes are the
same as Individual patterns.
NOTE:The remaining letters of the name
PINOCCHIO will be sewn in second
hooping.
NOTE: Pattern sewing order may be
changed by pressing
key.
Illustration of sewing at
end of 2nd hooping.
12. Position embroidery frame and secure materiai for 3rd hooping.