Attaching embroidery bed, Removing embroidery bed, Abcdef – SINGER XL1000 Quantum User Manual
Page 69: Abcjdef
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before removing embroidery bed
1
Press
6) key appearing outside embroidery
screen on LCD.
COMBINATION
EMBROIDERY
ABCDEF
MULTIPLE HOOP
EMBROIDERY
ABCjDEF
EKffiUNir
$T№AQE
POSITION
If posmoN key is shown
on touch-screen press
it. Then, carriage will
return to storage
position.
Attaching embroidery bed
Removing embroidery bed
Be sure to turn power off first. Failure to do
so will cause embroidery to not function.
1
Turn power off.
Slide auxiliary bed
to left.
Place your sewing machine
on a flat surface such as a
table, and install
embroidery bed by sliding
it to right until It clicks.
If embroidery bed is not
securely installed,
finished shape of pattern
can deform.
embroidery bed.
Be sure to turn power off first. Failure to do
so will cause sewing machine to not function.
Turn power off.
Holding embroidery
bed by left-hand side,
carefully slide towards
the left while pressing
removal button.
Caution:
Do not pull carriage when removing
embroidery bed.
68