Pulling up bobbin thread – SINGER XL1000 Quantum User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Turn handwheel,
counterclockwise to
Q
raise needle to high
est position.
S I 1^4 G k: R
I'
j iHJte* lK»«i hand» to fw#
if^
. Release needle threader.
Pull loop of thread that is
at back of the needle out
E.
about 4”.
10
Pulling up Bobbin
Thread.
Hold needle thread lightly with
left hand and turn handwheel
counterclockwise until needle
A.
enters needle plate.
Continue turning handwheel while
holding needle thread until needle rises.
Tighten hold on needle thread
B.
until bobbin thread is puiied up.
Undo loop with fingers.
Pull both needle and bobbin
threads out about 4” and pass
them under presser foot to back
C.
of machine.
Caution:
1. Do not lower threading lever while sewing
machine is in operation.
2
. Automatic needle threader will not work on
twin needles or wing needles.
I6