3xLOGIC VIGIL Server - Manual (Page 101)

10 Settings - Server Settings Tab
10.1 - Server Settings Tab - Basic Settings
The VIGIL Server Settings tab contains settings related to the software and hardware configuration of VIGIL Server.
10.1.1 Site Name
Site Name The name of the Site where VIGIL Server is located. The site name is included when saving still images.
Allow Auto Detect Allow the Server to be auto-detected by VIGIL Central Management (VCM) and VIGIL Client software.
10.1.2 Interface
Use Client As
Main Inter-
face
Allows the use of VIGIL Client as your VIGIL suite main interface. Many options available in server will now only be
accessible through Client. This allows a unified user experience whether using our VIGIL Server system or con-
necting remotely.
Black Box
Allows VIGIL Server to run in Black Box mode. Black Box mode causes Server to run without much of its functioning
interface, essentially becoming a background application.
This is often used with systems which are rarely altered or are only connected to via a remote connections.
10.1.3 Offsite Backup on Alarm
Enable automatic export of footage to the specified offsite location when a DIO alarm occurs.
Enable Offsite
Backup
Click the check box to enable this option. Click … and select Windows or VFS Path to browse to a net-
work location where the footage will be saved.
Alarm Input Select the DIO alarm input that will trigger the offsite backup or select Any Alarm Input.
Pre/Post Alarm
Backup
Specifies the number of minutes of footage to save prior to and after the Alarm event.
- 92 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide