3xLOGIC VIGIL Server - Manual (Page 60)

ONVIF Device Manager
After selecting the ONVIF type in your Network Camera settings, the
Web Settings button will change to Detect Cameras. Select this option
to proceed to the ONVIF Device Manager. You will first be met with a
small notification pictured below while the ONVIF Device Manager loads.
After a few seconds, the ONVIF Device Manager will boot and you will be met with the interface pictured below-right.
The ONVIF Device Manager
offers a large selection of set-
tings to help configure all of
your cameras using the ONVIF
standard to your personal pref-
erences. The manager consists
of three panes. The left pane is
the Device List which hosts a
list of all available camera
using the ONVIF standard.
Select your desired camera and
click Save to VIGIL to display
that camera within VIGIL
Server. The middle pane hosts
a list of camera configuration
options and the third(right)
pane is where you manually
configure the options you have
chosen to configure.
Configuring Imaging and Stream Settings in the ONVIF Device Manager
To edit stream and image
settings for a selected
camera, select Video
Streaming or Imaging Set-
tings. See Section 8 - Net-
work Camera Settings for
more info on camera set-
tings.
Click Apply to save settings.
©2014 3xLOGIC Inc. | VIGIL Server - User Guide - 51 -