3xLOGIC VIGIL Server - Manual (Page 98)

local database.
Check Allow data from... to allow data from this rule to sync to a central
database. If this box is not checked, this rule will not sync to a central
database. This allows for rules that will be used in centralized reporting
to sync to a central location, while rules that are not needed for cen-
tralized reporting can stay local to the VIGIL Server and not use band-
width / resources on the central system.
Description Enter a description for this Rule.
Rule Settings Tab
For this rule it is recommended to set the Tripwire Direction to Exit so that the results of the rule in the database make sense as, Exit-
ing the Queue Region.
Tripwire
Direction
Choose to monitor objects entering only, exiting only, or entering and exiting.
Enter Alarm
The Enter Alarm is triggered based on the number of people entering during a period of time. Check the Enter
Alarm checkbox to enable the alarm and then select number of people and period of time in seconds using the
arrow select tools.
Exit Alarm
The Exit Alarm is triggered based on the number of people exiting during a period of time. Check the Exit Alarm
checkbox to enable the alarm and then select number of people and period of time in seconds using the arrow
select tools.
Alarm Dwell The number of seconds of video recorded in alarm mode once the alarm is triggered.
Reset Sta-
tistics when
Alarmed
Enable this option to reset the statistics to zero once the alarm is triggered.
Due to the nature of the data gathered, disabling the Reset Statistics When Alarmed feature can cause a flood of
notifications when the threshold is reached.
©2014 3xLOGIC Inc. | VIGIL Server - User Guide - 89 -