3xLOGIC VIGIL Server - Manual (Page 126)

14.2 Notification Settings Tab
Configure Notification and Relay settings for the selected Digital Input.
14.2.1 Email Notification
When enabled, an email is sent when an alarm is triggered. Click Email Settings... to configure the email recipients and contents.
Enter the appropriate details for the email that will be sent. To add, edit, or remove email recipients, use the Recipients section and
the appropriate buttons. Enabling Attach Still Shot will add a still image of the selected cameras to the outgoing email. This image is
from the beginning of the triggered alarm event.
Note: For email options to function properly, a valid SMTP server must be set up correctly in the VIGIL Server Settings tab.
14.2.2 Output Relay
Select the Output Relay to trigger when the Digital Input Alarm is triggered. The Output Relay can be set to Latched or Momentary.
14.2.3 Notification Settings
Popup
Alarm
Screen
When a Digital Input alarm is triggered, opens an Alarm window on the VIGIL Server.
Monitor
Output
To display the Camera feed associated with the Digital Input on a Monitor during an alarm, choose the Monitor
Number or All Monitors from the Drop-Down.
Suppress
Email Noti-
fication
This option, which will only work in conjunction with enabling the Popup Alarm Window, will prevent a flood of
email alerts being sent out. It will only send out one email alert until the alerts have been acknowledged on the
Popup Alarm window. If alerts have been set to auto acknowledge, it will send out an email after each period of
auto acknowledgement has passed.
Audio Noti-
fication
Enables Audio Notification which plays a system beep or wave file when an alarm is triggered. When Wave File is
selected, click the … button to browse for the .wav file that will be played.
©2014 3xLOGIC Inc. | VIGIL Server - User Guide - 117 -