3xLOGIC VIGIL Server - Manual (Page 17)

native camera control setup in the camera settings.
Relays
Interfaces to the configured relays. Relays can be toggled on or off, corresponding to closed and open states respec-
tively.
# - Cam-
era
Changes the current video feed on the selected camera. If that video feed was on another camera display, it will move
the camera feed to the new location.
3.3 TV Output Switch
With supported hardware, VIGIL Server can display a number of video feeds to analog monitors. Outputs with Multiplexer support can
be configured as a multiplexed video output similar to the Live Viewer. The number of analog outputs and multiplex analog outputs
varies between models; please check the VIGIL Server model specification for details.
Note: Capture Card Types with multiplex analog output features available include:
l
VIGIL Server200X, VIGIL Server100X, VIGIL Server50X – one monitor output with multiplex support and one monitor
output with single camera support.
l
PROSERIES – output cards are available for use with this capture card type, all with multiplex support
The TV Output Switch changes the camera displayed on the monitor by selecting the camera
number. If no monitors are selected, click on the desired monitor number before selecting
the camera number.
On systems supporting Mux/Analog Out, you can also select the Setup Analog Out Mul-
tiplexer menu item, which opens the Analog Out Multiplexer window (see below).
To arrange cameras within the selected display grid,
right-click on a particular position and select a cam-
era. Camera positions are configured separately for
each grid style.
Undoes any layout changes
that have been made since the
Analog Output Multiplexer
window was last opened.
Toggles captions on and off
for the Analog Output Monitor
video feeds.
- 8 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide